Serving the Sioux Falls area  ·  (605) 501-5034  ·  Open Mon-Sun 7am-7pm
📞 (605) 501-5034 Free Quote

Metal Roofing in Sioux Falls, SD (57104) · Local Professionals

Sioux Falls Metal Roofing · Fast response in Sioux Falls and the Sioux Falls area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+324Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Sioux Falls is a city where pink quartzite Victorians in the Cathedral district and All Saints sit a few blocks from post-war ranches in Pettigrew Heights and Whittier. The housing stock here spans 1880s Queen Annes to 2020s two-stories in the growing southwest and southeast, and every one of them takes a beating from hail, blizzards, and plains wind.

Homeowners in 57104 call Sioux Falls Metal Roofing because we know how a roof fails here: ice dams at the eaves on high-elevation homes, wind-lifted panels after a storm like the May 2022 derecho, and fasteners that work loose after a few freeze-thaw cycles. We are based here, we are fully insured, and we are a Metal Roofing Alliance member.

Metal Roofing in Sioux Falls (57104)

The ground here is not uniform. You have quartzite outcrops near the falls and the Big Sioux River, heavy clay soils in parts of Minnehaha County, and tight lots in older neighborhoods like McKennan Park where a crew has to stage materials carefully and watch the neighbor's fence line. On the east side and in Harrisburg, Tea, and Brandon, lots are wider but grade and drainage still matter, especially where spring snowmelt runs off a steep pitch. Farmhouses and machine sheds out in Lincoln and Moody counties need panels that can handle open-plains wind without constant re-fastening. We size fasteners and flashing for those conditions, not for a mild climate.

Our team has worked on stone-coated steel, standing seam, corrugated and ribbed panels, and metal shingles across Sioux Falls and the surrounding area. We handle historic district and HOA design review when a profile or color needs approval, and we know how to document storm damage for an insurance claim without ever promising coverage.

Our services in Sioux Falls

How a Job Works in Sioux Falls

Step 1: You call (605) 501-5034 or request a free on-site assessment. We look at the roof, the deck, the flashing, and the drainage, and we talk through whether a repair, a replacement, or a retrofit over existing shingles makes sense. If you are in a historic district or an HOA, we flag that early so there are no surprises.

Step 2: We schedule the work and pull the required roofing permit through the local building department. On tight lots in older neighborhoods, we plan material drops and dumpster placement so we do not block alleys or driveways. For a full replacement, we remove the old roof, inspect and repair the deck, and install new underlayment and flashing before the panels go on. For a retrofit, we confirm the existing layers meet code before we add anything.

Step 3: Cleanup is part of the job. We magnet-sweep for nails, haul away debris, and walk the property with you to check the finished roof, gutters, and any snow guards or ice protection. We do not leave until you have seen the work and signed off.

Pricing in Sioux Falls depends on the roof, the access, and the condition of the deck and flashing. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, standing seam around $10, and copper or specialty metal around $20. Repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Snow guards and ice protection start at $1,200, and gutters for metal roofs run from $9 per linear foot. The biggest cost factors are roof size and pitch, how many layers are already there, whether the deck needs repair, and how quickly you need us out. Call (605) 501-5034 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Sioux Falls and nearby areas.

My 1920s bungalow near McKennan Park has ice dams every winter. Can a metal roof help?
Yes, but the fix is more than the panels. Ice dams form when warm air leaks into the attic and melts snow that refreezes at the eaves. We install metal roofing with proper underlayment and ice protection, and we look at ventilation and insulation gaps while we are up there. On older homes around McKennan Park, we often find skipped underlayment or blocked soffit vents that make the problem worse.
A storm just peeled back panels on my roof in Sioux Falls. How fast can you get out?
Call (605) 501-5034 and we will schedule a free inspection as soon as possible, usually within a day or two depending on storm volume. We can tarp or secure an active leak to limit damage, then document everything for your insurance claim. We never promise coverage, but we do provide the photos and written scope your adjuster needs.
What does a typical metal roof replacement cost in Sioux Falls?
Most homeowners are looking at somewhere between $9 and $14 per square foot installed for a standard replacement, depending on the panel type and whether the deck needs work. A retrofit over existing shingles can be less, starting around $7 per square foot, if your roof qualifies under code. We give you a written estimate after a free on-site assessment, so you are not guessing.
Do I need a permit for a metal roof in Sioux Falls?
Roofing permits are commonly required for a full replacement or re-roof, and the thresholds and inspection requirements vary by jurisdiction. We pull the permit for you and coordinate the inspection. For the specific rules that apply to your address, check the City of Sioux Falls website or call the building department directly, since requirements can change.
My HOA has to approve the roof color. Can you help with that?
Yes. We provide panel profile and color samples, and we can supply the product documentation your HOA or historic district review board asks for. If your home is in a historic district, we check the design review requirements before ordering materials so you are not stuck with a color that gets rejected. We also keep an eye on property lines and set back requirements when we plan the install.
Are you insured for work on my property?
We are fully insured, with general liability and workers' compensation coverage. That protects you if someone is injured on the job or if property is damaged during the install. We are happy to provide a certificate of insurance before we start.
What maintenance does a metal roof need in Sioux Falls?
Check the fasteners and seals once a year, especially after a hail season or a hard winter. Look for loose screws, lifted panels, and debris in the gutters and valleys. Snow guards help prevent snow slides onto walkways and shrubs, and they are worth considering on steep pitches. We offer inspections and can re-fasten or replace screws before a small issue becomes a leak.
Why choose us?

Trusted professionals in Sioux Falls

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Sioux Falls

All your work handled by qualified professionals in Sioux Falls

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

324+ Verified Client Reviews in Sioux Falls

⭐⭐⭐⭐⭐ 4.9/5 · 324 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Sioux Falls · Response within 24h · No commitment · ☎ (605) 501-5034

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Sioux Falls ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm