Serving the Sioux Falls area  ·  (605) 501-5034  ·  Open Mon-Sun 7am-7pm
📞 (605) 501-5034 Free Quote

Metal Roofing in Renner, SD (57055) · Local Professionals

Sioux Falls Metal Roofing · Fast response in Renner and the Sioux Falls area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+324Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Renner is a small, tight-knit community just north of Sioux Falls where the prairie opens up and the wind hits harder. Most homes here sit on larger lots or acreages, and the mix of older farmhouses, updated ranches, and newer builds means roofs take a beating from day one. With the Big Sioux River nearby and open farmland all around, there's nothing to block the weather that rolls in.

Homeowners in Renner (57055) call us because we understand what standing seam and quality metal roofing can do for properties that face brutal winters, hail, and wind without a break. We're based in Sioux Falls, just a short drive down I-29, and we've worked on everything from farmhouses to new construction in the area. When your roof needs attention, you want a crew that knows the local conditions and won't waste your time.

Metal Roofing in Renner (57055)

Properties in Renner often sit on larger, open lots where wind exposure is a real factor. The freeze-thaw cycles here are relentless, and we see a lot of failed fasteners, ice damming at the eaves, and shingles that crack after a cold snap. Many homes are older farmhouses or ranches with original roof decks that need a careful inspection before any new metal goes on. We also deal with grading and drainage issues on sloped lots, and access can be tight on some of the older properties. Our team knows how to handle these challenges without cutting corners.

We've been serving Renner and the surrounding Minnehaha County area for years, and we've seen firsthand how a properly installed metal roof can handle the local climate. Whether it's a standing seam system on a new build or a retrofit over existing shingles, we bring the same attention to detail and respect for your property.

Our services in Renner

How a Job Works in Renner

Step 1: You call us at (605) 501-5034 or request a free estimate online. We schedule a time to come out to your Renner property and assess the roof, looking at the deck condition, existing layers, and any problem areas. We'll walk you through the options and give you a clear, written estimate.

Step 2: Once you approve, we pull the necessary permits and get to work. On many Renner properties, we're dealing with larger lots and open exposure, so we plan for material delivery and staging to minimize disruption. Our crews are fully insured and trained to handle everything from standing seam installation to complex flashing and gutter work. We keep you informed throughout the project.

Step 3: When the job is done, we do a thorough cleanup, haul away all debris, and walk the property with you to make sure you're satisfied. We don't leave until everything is buttoned up and you have a clear understanding of the work we performed.

Metal roofing in Renner is priced based on the size and complexity of your roof, the material you choose, and any repairs needed before installation. For a typical ranch home, metal roof installation starts around $8 per square foot, while standing seam runs about $10 per square foot. If you're replacing an existing roof, expect to start around $9 per square foot. For a retrofit over shingles, pricing starts at $7 per square foot. Smaller repair jobs, like fixing a leak or replacing fasteners, start at $450. We also offer free inspections so you know exactly what you're dealing with before committing. Call us at (605) 501-5034 for a free estimate tailored to your Renner property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Renner and nearby areas.

My Renner home is on an open lot with strong winds. Will a metal roof hold up better than shingles?
Yes, metal roofing is an excellent choice for windy, open locations like Renner. Standing seam panels are attached with concealed fasteners and are rated for high wind speeds, so they resist lifting and peeling far better than asphalt shingles. We also install snow guards and ice protection to handle heavy snow and ice damming, which are common issues here.
A storm just rolled through Renner and I think my roof is damaged. How quickly can you respond?
We prioritize storm damage calls and can often get out to your Renner property within a day or two for an inspection. Call us at (605) 501-5034 and we'll assess the damage, provide a written estimate, and help with insurance documentation if needed. We never promise coverage, but we make the process as smooth as possible.
What's the typical cost for a metal roof on a ranch-style home in Renner?
For a standard ranch home in Renner, metal roof installation typically starts around $8 per square foot, and standing seam starts around $10 per square foot. The final price depends on roof size, pitch, and whether any deck repairs are needed. We offer free estimates so you can get an accurate number for your specific home.
Do I need a permit for a metal roof replacement in Renner?
Yes, roofing permits are commonly required for a full replacement or re-roof in Renner and Minnehaha County. Requirements vary, so it's best to check with the local building department. We handle the permitting process for you and make sure the work meets all applicable codes. You can also visit the City of Renner website at https://www.minnehahacounty.gov for general information.
My neighbor and I share a property line, and I'm worried about the roof overhang. What should I do?
Property line issues can be tricky, but we're experienced in handling them. Before work begins, we review your property lines and any HOA rules that might apply. If there's a concern about overhangs or drainage onto a neighbor's property, we'll discuss it with you and adjust the plan accordingly. We always aim to keep things neighborly.
Are you fully insured for work on my Renner property?
Absolutely. We carry general liability insurance and workers' compensation coverage for every job. You can request a certificate of insurance before we start, and we're happy to provide it. Your property and our crew are protected.
What maintenance does a metal roof need in Renner's climate?
Metal roofs are low-maintenance, but in Renner's freeze-thaw cycles, it's smart to have annual inspections. We check fasteners, seals, and flashing, and clear debris from gutters. Snow guards are also recommended to prevent large snow slides. Regular maintenance extends the life of your roof and catches small issues before they become costly repairs.
Why choose us?

Trusted professionals in Sioux Falls

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Sioux Falls

All your work handled by qualified professionals in Sioux Falls

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

324+ Verified Client Reviews in Sioux Falls

⭐⭐⭐⭐⭐ 4.9/5 · 324 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Sioux Falls · Response within 24h · No commitment · ☎ (605) 501-5034

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Sioux Falls ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm