Serving the Sioux Falls area  ·  (605) 501-5034  ·  Open Mon-Sun 7am-7pm
📞 (605) 501-5034 Free Quote

Metal Roofing in Hartford, SD (57033) · Local Professionals

Sioux Falls Metal Roofing · Fast response in Hartford and the Sioux Falls area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+324Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Hartford, South Dakota, sits just west of Sioux Falls along Interstate 90, where the open prairie meets fast-growing subdivisions and older farmsteads. Many of the newer homes here, especially in developments off Highway 38 and near the Hartford Golf Course, are two-story builds from the 1990s onward that look great with metal shingles. But this is still Minnehaha County farm country, and the same blizzards that bury a Hartford roof can send snow sliding off a metal panel all at once.

That's why homeowners in Hartford (57033) call Sioux Falls Metal Roofing. We know how Hartford weather treats a roof, from the heavy snow loads to the spring hail that rolls in off the plains. Our crews are licensed and insured, and we handle everything from metal shingle roofs on newer homes to repairs on the older farmhouses and machine sheds that dot the countryside around town.

Metal Roofing in Hartford (57033)

Hartford is a mix of newer residential streets and wide-open agricultural land. In town, lots are typically generous but not huge, and many homes have attached garages and mature trees that can drop limbs on a roof during a storm. The ground here is prairie soil that can get soft in spring, so we plan staging areas carefully to avoid ruts and keep access clean. On the farmsteads outside Hartford, we deal with long, low-slope machine sheds and grain bins where corrugated and ribbed panel roofing is the practical choice. The wind out here is no joke, and we fasten every panel with that in mind. We also see a lot of ice damming at the eaves on two-story homes when snow melts and refreezes, which is why proper underlayment and ice protection matter.

Our team has worked on roofs across Hartford and the surrounding Sioux Falls area for years. Whether it's a metal shingle roof on a newer subdivision home or a standing seam retrofit on an older ranch, we bring the same approach: assess the deck, plan for the weather, and install it to last.

Our services in Hartford

How a Job Works in Hartford

Step 1: You call us at (605) 501-5034 or request a free estimate online. We schedule an on-site assessment at your Hartford property, usually within a few days. We'll inspect your current roof, check the deck and flashing, and talk through options like metal shingles, standing seam, or a retrofit over existing shingles. You get a written estimate before any work begins.

Step 2: Once you approve, we pull the necessary permits. Roofing permits are commonly required in Hartford for full replacements, and rules vary, so we confirm details with the local building department. If you're in an HOA, we help coordinate color and profile approval. Our crew then gets to work, protecting your landscaping and staging materials efficiently, even on tighter in-town lots.

Step 3: After installation, we do a thorough cleanup, including magnet sweeps for nails and debris. We walk the property with you, show you the finished work, and make sure you're satisfied before we leave. We leave your yard as clean as we found it.

Pricing for metal roofing in Hartford depends on the job. As a ballpark, metal roof installation starts around $8 per square foot, standing seam from $10, metal roof replacement from $9, and a retrofit over shingles from $7. Smaller repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. Metal shingle and stone-coated steel roofs start around $9 per square foot, while copper and specialty metals run higher. The final cost depends on roof size, pitch, access, the condition of the existing roof, and how soon you need it done. We give free estimates, so call (605) 501-5034 to get a real number for your Hartford home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Hartford and nearby areas.

My Hartford home is in one of the newer subdivisions off Highway 38. Is metal shingle roofing a good fit for that style of house?
Yes, metal shingles are a great choice for the newer two-story homes in Hartford. They give you the look of traditional shingles with the durability of steel, and they handle the heavy snow and hail we get here. We can match styles that fit your neighborhood's look, and we'll help you choose a color that works with your home's exterior.
A storm just blew through Hartford and I think some panels lifted. How fast can you respond?
We treat storm damage as a priority. Call us at (605) 501-5034 and we'll schedule an inspection as soon as possible, often within a day or two depending on demand. We'll document the damage for your insurance claim and make temporary repairs if needed to prevent further leaking.
What does a typical metal roof repair cost in Hartford?
Most repairs start around $450 for leak fixes, and screw replacement or re-fastening starts at $750. The exact price depends on the problem, roof access, and materials. We give free estimates, so you'll know the cost before we start.
Do I need a permit for a metal roof in Hartford, and how do I check?
Roofing permits are commonly required for full replacements in Hartford, and requirements can vary. We recommend checking with the city or county building department before starting. You can find contact information on the City of Hartford website at https://www.minnehahacounty.gov. We're happy to help you navigate the permit process as part of our service.
My neighbor and I share a property line, and I'm worried about where my new roof will drain. What should I do?
It's smart to think about drainage before installation. We'll review your property lines and drainage patterns during the estimate. If there's any question, we recommend getting a survey or talking with your neighbor. For HOA rules, we can help coordinate approval for color and style.
Are you fully insured for work at my Hartford property?
Yes, we are fully insured with general liability and workers' compensation coverage. We're happy to provide proof of insurance before we start any job.
What maintenance does a metal roof need in Hartford's climate?
Metal roofs are low maintenance, but in Hartford's climate we recommend an annual inspection, especially after winter. Check for loose fasteners, debris in valleys, and snow guards if you have them. We offer free inspections and can advise on ice protection and snow guards to prevent sliding snow hazards.
Why choose us?

Trusted professionals in Sioux Falls

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Sioux Falls

All your work handled by qualified professionals in Sioux Falls

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

324+ Verified Client Reviews in Sioux Falls

⭐⭐⭐⭐⭐ 4.9/5 · 324 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Sioux Falls · Response within 24h · No commitment · ☎ (605) 501-5034

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Sioux Falls ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm