Serving the Sioux Falls area  ·  (605) 501-5034  ·  Open Mon-Sun 7am-7pm
📞 (605) 501-5034 Free Quote

Metal Roofing in Garretson, SD (57030) · Local Professionals

Sioux Falls Metal Roofing · Fast response in Garretson and the Sioux Falls area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+324Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Garretson sits right on the edge of the open farmland east of Sioux Falls, where the Big Sioux River cuts through pink quartzite and the town still feels like a place where everybody knows your roof. The housing stock here tells the story: older Victorians and foursquares near the center of town, mid-century ranches along the main streets, and a ring of farmhouses, red barns, and machine sheds out toward Palisades and the county line. Lots are wide, driveways are gravel, and the wind comes across those fields with nothing to stop it.

That is why homeowners and farm owners in Garretson (57030) call Sioux Falls Metal Roofing. We know the hail that rolls through Minnehaha County every spring, the ice dams that form on older eaves, and the way a grain farm near Palisades needs a roof that can handle a December blizzard and a July downpour in the same year. We are based in Sioux Falls and serve Garretson and the surrounding area, and we treat every roof like it is on our own street.

Metal Roofing in Garretson (57030)

Garretson is a river town with a farm backbone. The ground rises and falls toward the Big Sioux, and the older homes near the center often have steep pitches, small lots, and mature cottonwoods and ash that drop limbs and fill gutters. Out on the farms toward Palisades and the South Dakota border, you have long, low barn roofs, machine sheds with wide spans, and grain bins that take the full force of the plains wind. That wind is the real test here. After the May 2022 derecho and the tornadoes that have touched down in the area, we see plenty of lifted panels, pulled fasteners, and seams that have opened up. Metal holds up better than asphalt in this climate, but only if it is installed with the right fasteners, the right flashing, and the right attention to how snow and ice will move off the roof.

Our team has worked on everything from Victorian-era homes with complex rooflines to modern two-story builds and agricultural buildings. We are a Metal Roofing Alliance Member, fully insured with general liability and workers' compensation, and we handle installation, repair, replacement, and retrofits over existing shingles. If you are in Garretson and your roof is telling you it is time, we will give you a straight answer.

Our services in Garretson

How a Job Works in Garretson

Step 1: You call us at (605) 501-5034 or request a free estimate online. We schedule an on-site assessment at your property in Garretson, whether that is a house in town or a barn out on the county road. We look at the roof, the attic, the flashing, the gutters, and the access, and we talk through what you are seeing and what you want. You get a written estimate with clear pricing and options, no pressure.

Step 2: Once you approve, we pull the required roofing permit through the local building department and schedule the work. In Garretson, that often means coordinating with the city or county on inspection timing, and on older homes we may need to plan around tight driveway access or a steep pitch that requires extra safety setup. For farm buildings, we work around your schedule and your animals. Our crews are trained on standing seam, corrugated and ribbed panels, metal shingles, and stone-coated steel, so we match the material to the building, not the other way around.

Step 3: When the job is done, we clean up. We magnet-sweep for nails, haul away old materials, and walk the property with you to make sure you are satisfied. We do not leave a mess behind, and we do not consider the job finished until you have had a chance to look it over and ask questions.

Pricing in Garretson depends on the size and pitch of your roof, the material you choose, how much prep and repair is needed, and how quickly you need it done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10, metal roof replacement starts at $9, and a retrofit over existing shingles starts at $7. Repairs and leak repairs start at $450, screw replacement and re-fastening starts at $750, and coating or painting starts at $2.50 per square foot. Snow guards and ice protection start at $1,200, and gutters for metal roofs start at $9 per linear foot. Farm and commercial work is quoted after a free estimate. We are happy to walk you through the numbers and help you compare options. Call (605) 501-5034 to set up a free estimate in Garretson.

✅ Metal Roofing Alliance Member, licensed and insured for work in Garretson and nearby areas.

My barn near Palisades has screws backing out and panels that rattle in the wind. Can you fix that without replacing the whole roof?
Yes, that is one of the most common calls we get from farm properties around Garretson. Screw replacement and re-fastening starts at $750, and we check the panels, washers, and seams while we are up there. If the panels are still sound, re-fastening with the right screws and washers can add years to the roof. If there is wider damage, we will show you photos and give you options.
A storm just took off part of my roof in Garretson. How fast can you get out there?
We prioritize active leaks and storm damage. Call us at (605) 501-5034, and we will schedule the soonest available inspection, often the same day or next day depending on the weather and our route. We can tarp or secure the area to prevent further damage, document what we find for your insurance claim, and give you a repair estimate. We never promise coverage, but we do provide the documentation your adjuster will want.
What does a typical metal roof cost for a house in Garretson?
For a standard ranch or two-story home in the 57030 area, most installations fall in the range of $8 to $14 per square foot depending on the material and complexity. Standing seam is at the higher end, corrugated and ribbed panels are at the lower end, and stone-coated steel sits in the middle. Repairs are usually a few hundred dollars, and we always give you a written estimate before any work begins.
Do I need a permit to replace my roof in Garretson?
Roofing permits are commonly required for a full replacement or re-roof, and the rules can vary depending on whether you are inside the city limits or out in the county. We handle the permit application and coordinate inspections with the local building department as part of the job. You can also check the City of Garretson website through Minnehaha County at https://www.minnehahacounty.gov for general local information, but we will confirm the specific requirements for your address before we start.
My neighbor's tree hangs over my roof, and I am worried about the property line. What should I do before a metal roof install?
It is smart to sort that out early. We can look at the roof and note where limbs are close or touching, and we will tell you what needs to be trimmed for a clean installation. Property line questions are between you and your neighbor, but we can show you exactly where the work will happen so you can have that conversation. If you are in an HOA, we can also provide product specs and color samples for approval before we order materials.
Are you insured for work on my property in Garretson?
Yes. We are fully insured with general liability and workers' compensation coverage. That protects you and your property if anything goes wrong on the job. We are happy to provide a certificate of insurance before we start, and we are a Metal Roofing Alliance Member.
What should I do to get my metal roof ready for winter in Garretson?
The biggest issues here are ice dams at the eaves and snow sliding off the roof. Before the first hard freeze, we recommend a roof inspection to check fasteners, flashing, and seals, and to clear gutters and downspouts. If you have had ice dams before, snow guards and ice protection start at $1,200 and can help control where the snow goes. We also offer metal roof coating and painting if your roof is older and showing wear. A quick check in the fall is a lot cheaper than a leak in January.
Why choose us?

Trusted professionals in Sioux Falls

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Sioux Falls

All your work handled by qualified professionals in Sioux Falls

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

324+ Verified Client Reviews in Sioux Falls

⭐⭐⭐⭐⭐ 4.9/5 · 324 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Sioux Falls · Response within 24h · No commitment · ☎ (605) 501-5034

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Sioux Falls ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm