Serving the Sioux Falls area  ·  (605) 501-5034  ·  Open Mon-Sun 7am-7pm
📞 (605) 501-5034 Free Quote

Metal Roofing in Humboldt, SD (57035) · Local Professionals

Sioux Falls Metal Roofing · Fast response in Humboldt and the Sioux Falls area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+324Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Humboldt is a small farm town where the grain bins outnumber the stoplights, and the roofs take a beating from everything the northern plains throws at them. Most homes here are modest ranches and older farmhouses with a few newer builds on the edge of town, and nearly every property has a machine shed or outbuilding that needs a roof that can handle hail, wind, and heavy snow.

Homeowners in Humboldt (57035) call Sioux Falls Metal Roofing because we understand the local conditions, from the open farmland wind that peels back shingles to the ice dams that form on low-slope porch roofs. We are based in Sioux Falls and serve Humboldt and the surrounding Minnehaha County area, and we are a Metal Roofing Alliance member with fully insured crews.

Metal Roofing in Humboldt (57035)

Humboldt sits in open farmland where the wind rarely stops, and that changes how a roof needs to be installed. The ground here is flat and drains slowly after spring snowmelt, so we pay close attention to eave details and ice-and-water shield to prevent water from backing up under the panels. Many homes have mature shelterbelts of ash and cottonwood that drop limbs during summer storms, and those limbs can puncture even a sturdy metal roof. We often repair or replace roofs on farmhouses that have had three or four layers of shingles added over the decades, and we can tell you whether a retrofit over the existing shingles makes sense or if a full tear-off is the better path. Grain bins and machine sheds are common here, and we handle those agricultural metal roofs as well as residential ones.

Our team has worked throughout Minnehaha County, including Humboldt, and we know the local building department expects permits for full replacements. We help you understand what is required before any work begins.

Our services in Humboldt

How a Job Works in Humboldt

Step 1: You call us at (605) 501-5034 or request a free estimate online. We schedule an on-site assessment at your Humboldt property, and we look at the roof, the attic, the flashing, and the gutters. We give you a written estimate with options, including repair versus replacement, and we answer your questions about materials and timeline.

Step 2: Once you approve the estimate, we pull the necessary permits through the local building department and schedule the work. On many Humboldt properties, access is straightforward, but farm sites sometimes have narrow drives or overhead wires that require extra care. We coordinate with you on delivery and staging so we do not block your driveway or your neighbor's.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and walk the property with you to make sure you are satisfied. We do not leave until you have had a chance to inspect the finished roof and gutters.

Pricing for metal roofing in Humboldt depends on the size and pitch of your roof, the condition of the existing shingles, and the type of metal you choose. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, and standing seam metal roofing starts around $10 per square foot. A metal roof over existing shingles (retrofit) starts around $7 per square foot, and a full replacement starts around $9 per square foot. Repairs, including leak repair, start around $450, and screw replacement or re-fastening starts around $750. Coating and painting start around $2.50 per square foot. We give free estimates, so call (605) 501-5034 and we will give you a clear number for your specific property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Humboldt and nearby areas.

My farmhouse near the Humboldt elevator has three layers of shingles. Can you install metal over them?
Possibly, but it depends on the condition of the decking and local code limits on the number of existing layers. We inspect the roof structure first and let you know whether a retrofit over shingles is allowed and safe, or if a tear-off is the better choice. We handle both options.
A storm just peeled back panels on my machine shed in Humboldt. How fast can you get out?
We prioritize storm and wind damage calls in the Humboldt area. Call (605) 501-5034 and we will schedule an inspection, often within a day or two depending on demand. We can tarp or secure the roof temporarily if needed and give you a repair estimate.
What does a typical metal roof cost for a ranch-style home in Humboldt?
For a 1,500 to 2,000 square foot ranch, corrugated panel roofing often runs in the range of $8,000 to $12,000 installed, while standing seam is higher. The exact price depends on roof complexity, tear-off, and trim. We give free written estimates so you know before you commit.
Do I need a permit for a metal roof replacement in Humboldt?
Yes, a full replacement or re-roof typically requires a permit through the local building department. Requirements vary, so we recommend checking with the City of Humboldt or Minnehaha County before work begins. We can help you understand the process and often handle the permit paperwork for you.
My neighbor's tree drops limbs on my roof. Who is responsible, and will my HOA care about the metal color?
In South Dakota, you generally have the right to trim branches that overhang your property line, but check local rules first. If you are in an HOA, review the covenants for approved roof colors and profiles before ordering materials. We can provide color samples and documentation to help with approval.
Are you insured for work on my Humboldt property?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance upon request so you have peace of mind before we start.
How often should I have my metal roof inspected in Humboldt?
We recommend an inspection after every major hail or wind event, and at least once a year, ideally in the fall before snow flies. Check for loose fasteners, lifted panels, and clogged gutters. We offer free estimates for inspections and can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Sioux Falls

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Sioux Falls

All your work handled by qualified professionals in Sioux Falls

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

324+ Verified Client Reviews in Sioux Falls

⭐⭐⭐⭐⭐ 4.9/5 · 324 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Sioux Falls · Response within 24h · No commitment · ☎ (605) 501-5034

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Sioux Falls ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm